We’re Exhibiting at Automechanika Frankfurt 2026 — September 8 | Hall 4.2, Stand M31 — 
EN
-
Can Cast Iron Be Welded? Avoid The Repair Mistakes That Spread Cracks
2026/06/29Can cast iron be welded? Learn when welding works, when brazing or stitching is safer, and how to prevent cracks from spreading.
-
How To Weld Cast Aluminum Without Chasing Porosity And Cracks
2026/06/27How to weld cast aluminum: inspect the part, clean in stages, choose TIG filler and gas, and avoid porosity, cracks, and unsafe repairs.
-
How Thick Is 11 Gauge Metal? Avoid Costly Spec Mistakes
2026/06/26How thick is 11 gauge metal? See 11 gauge thickness in inches, mm, and fractional form for steel, stainless, galvanized, and aluminum.
-
What Is Sheet Metal? Why Gauge And Process Matter More Than You Think
2026/06/25What is sheet metal? Learn its definition, materials, gauge, thickness, fabrication methods, and how to choose the right supplier.
-
What Is Non Ferrous Metal? Avoid Costly Picks And Wrong Specs
2026/06/28What is non ferrous metal? Learn its meaning, examples, ferrous vs non-ferrous differences, magnet myths, uses, recycling, and selection tips.
-
Copper Plating Car Parts: The Hidden Prep That Stops Peeling
2026/06/27Copper plating car parts starts with substrate ID and surface prep. Learn which parts qualify, why peeling happens, and when pro plating makes sense.
-
What Is 6013 Welding Rod Used For? Stop Guessing, Weld Smarter
2026/06/26What is 6013 welding rod used for? Learn where E6013 works best, when to avoid it, AC or DC setup basics, and how it compares with 6011 and 7018.
-
Safe Flame, Solid Bead: How to Start Oxy Acetylene Welding
2026/06/25How to start oxy acetylene welding safely, from setup and torch lighting to neutral flame control, first beads, troubleshooting, and shutdown.
-
Negative And Positive Bypass Notches Sheet Metal Stamping Die Decoded
2026/06/24Learn how positive and negative bypass notches control strip feeding in progressive stamping dies. Compare geometry, material impact, wear patterns, and design parameters.
-
How To Weld Vertical Stick Without Sag, Undercut, Or Rework
2026/06/24Learn how to weld vertical stick with better puddle control, rod choice, pass sequence, and fixes for sag, undercut, slag, and rework.
-
When Did CNC Machining Start? Why The Answer Isn't One Date
2026/06/23When did cnc machining start? Learn why the answer spans 1940s NC roots, 1950s working systems, and later computer-controlled CNC adoption.
-
How to Set Up MIG Welding So Your First Bead Runs Clean
2026/06/22Learn how to set up MIG welding safely, choose wire and gas, verify polarity, and tune settings for cleaner first beads.